Salt tablets for water softeners (Axal) 1,5x2,5 cm (25 Kg)

SALT TABLETS FOR WATER SOFTENERS (AXAL) 1,5x2,5 cm (25 Kg).

MEDIUM CHEMICAL ANALYSIS

Determined by Fluorescence X and Loss by Calcination (Instrument: XRF Spectrometer)

NaCl : 99.93%

Ca + Mg: 0.004%

SO2-4: 0.04%

Insoluble in H2O: 0.005%

Residual Moisture: 0.02%

As: <0.1 mg / Kg

Cd: <0.1 mg / Kg

Cr: <0.1 mg / Kg

Hg: <0.02 mg / Kg

Ni: <0.1 mg / Kg

Pb: <0.5 mg / Kg

Sb: <0.1 mg / Kg

If: <0.1 mg / Kg

Cu: <0.1 mg / Kg

Fe: <1 mg / Kg

Mn: <0.1 mg / Kg

PHYSICAL CHARACTERISTICS

Apparent Density: Approx. 1000 Kg / m3

NOTE

Specification based on NF, EN 973, EN 14805 and Codex Alimentarius requirements. Typical values based on periodic analyzes.

EN 973: Chemical products used for the treatment of water intended for human consumption - Sodium chloride for the regeneration of ion exchangers.

EN 14805: Chemicals used for the treatment of water intended for human consumption - Sodium chloride for on-site electrochlorination using membrane-free technology.

The tablets are produced from a refined food-grade salt that meets the Codex Alimentarius purity criterion.

The product complies with EN 973 (A) standards relating to salt for the regeneration of ion exchange resins of water softeners

Pad size

Diameter: 25 mm

Height: approx. 16 mm

Weight: approx. 15 g

Granulometry

Fineness <5.0 mm max. 4.0% typical: 2%

Field of application

For industrial use.

AXAL® PRO tablets are used to obtain a very pure brine for the regeneration of the ion exchange resins of water softeners.

Production

AXAL® PRO tablets are obtained by high mechanical pressure, without the use of anti-packing agent.

Storage

In order to avoid any risk of contamination, the use and storage of the product must take place in adequate hygienic conditions. Do not stack more than two pallets on top of each other.