Zeolite & pomice 3/7 mm (pallet da 40 sacchi da 33 lt), ammendante per piante Zeolite & pomice 3/7 mm (pallet da 40 sacchi da 33 lt), ammendante per piante
002123--0002454.jpg
Zeolite & pomice 3/7 mm (pallet da 40 sacchi da 33 lt), ammendante per piante

Zeolite & pumice 3/7 mm (pallet of 40 bags of 33 lt), soil improver for plants

12,00 €
312,00 €

(Price per liter (L)
0,24 €
)
In Stock

Product SKU: 002123

ZEOLITE & PUMICE 3/7 mm (pallet of 40 bags of 33 lt) , FINE FOR PLANTS.

50% blend of zeolite & pumice; the material has a small amount of processing powder useful for the growth and nourishment of plants. The product is a natural mix of the two minerals (it is not an artificial mixture of pumice and zeolite); it is therefore a rock that has a composition that is halfway between pumice and zeolite.

Group of minerals consisting of 52 mineralogical species chemically defined as "hydrated aluminosilicates of alkaline and / or alkaline-earth elements" (essentially, Na, K and Ca) and structurally constituting the family of tectosilicates with feldspar, feldspar and silica minerals. In this family of silicates, the primary structural units, tetrahedra [(Si, Al) O4], are connected to each other in the three directions of space to form three-dimensional scaffolds with a consequent ratio of tetrahedral cation (Si, Al) to oxygen of 1: 2.

Unlike what occurs in other families of silicates where the same structural units are isolated (nesosilicates, e.g. olivines), connected in one direction (inosilicates, e.g. pyroxenes) or in two directions (phyllosilcates, e.g. clay minerals ), the three-dimensional tetrahedral scaffolding of tectosilicates gives rise to ?open? structures due to the presence of extratretrahedral cavities of increasing volume from feldspar and silica minerals to feldspar to zeolites.

The three-dimensional tetrahedral scaffolding of zeolites is "very open" (low tetrahedral density) and, as such, has large internal cavities (from 20 to 50% of the volume of the crystal) communicating with each other and with the outside through channels of molecular dimensions (from 2.5 to about 7 Å; 1 Å = 10 ?8 cm).

In their natural state, cavities and channels are occupied by cations (Na, K, Ca) and water molecules. The cations, necessary to balance the negative electrical charges of the tetrahedral scaffold due to the partial replacement of Si4 + with Al3 +, being weakly linked to the tetrahedral scaffold, enjoy a certain freedom of movement and can exit, through the channels, from the cavities and therefore from the crystal only if replaced by other cations having the same number of positive electric charges.

This property, known as "cation exchange capacity" (CSC), has an intensity (expressed in meq / g) increasing with the increase of the Al content in the tetrahedra and varies from about 2 meq / g in the zeolites poor in Al (clinoptilolite , ferrierite mordenite) at 3-4 meq / g in zeolites rich in Al (cabasite, phillipsite).

The water, from 10 to 20% by weight depending on the zeolite species, can be easily and more or less continuously removed by heating below 300-350 ° C with no or modest modifications of the tetrahedral scaffold.

The dehydrated zeolites have a large internal surface (up to a few hundred m2 per gram of substance) available to still host water molecules or other molecules with natural or induced polarity. The dehydration-rehydration process is reversible almost indefinitely and the absorption of polar molecules occurs according to a rigid "selection" based "first and foremost" on the size of the molecules and, secondly, on their degree of polarity.

 

MEDIUM CHEMICAL ANALYSIS

SiO 2 : 46.5%

At 2 O 3 : 15.0%

K 2 O: 6.0%

Fe 2 O 3 : 3.0%

CaO: 10.0%

Na 2 O: 0.6%

TiO 2 : 0.5%

MgO: 2.3%

SO 3 : 0.3%

MnO: 0.1%

SrO: 0.1%

BaO: 0.05%

P 2 O 5 : 0.1%

TECHNICAL FEATURES

pH: 6.9 - 7.1;

HIGH CATION EXCHANGE CAPACITY: (CSC = 2 - 4 meq / g) and selective for low solvation energy cations (NH4, K, Cs, Pb);

HIGH STRUCTURAL CRYPTOPOROSITY: (from 20 to 50% of the volume of the crystal);

REVERSIBLE DEHYDRATION ;

MOLECULAR SIEVING ;

WATER RETENTION ;

MECHANICAL RESISTANCE ;

PERMEABILITY ;

LOW DENSITY .

FUNCTIONAL CHARACTERISTICS AND FIELDS OF USE

Lightweight natural inert, ideal for:

? allows to reduce watering by 30-40% thanks to the characteristics described above;

? neutralizes harmful elements, ammonium, heavy metals, organic molecules;

? absorbs odorous gases, ammonia, hydrogen sulphide, mercaptans;

? improves the use of fertilizers, consequently reducing the quantities to be used;

? purification of waste water;

? rooting substrate (sowing, cuttings, transplants, soilless crops and hydroculture);

? preparation of universal molds;

? preparation of specific soils (annuals, acidophilic plants, succulents, houseplants, lawns?);

? preparation of professional soils for outdoor horticultural nurseries and protected crops;

? land amendment;

? hydroculture;

? drainage;

? animal feed, in a variable quantity between 2 and 3% (reduction of the N-ammonia content of sewage, reduction of intestinal and respiratory diseases, inhibition of the absorption by animals of afla- and mycotoxins, slight improvement of feed conversion index, reduction of NH3 content and unpleasant odors in farms and neighboring areas).

download-schede-sicurezza

download-schede-tecniche

Scheda sicurezza
https://docs.geosism.com/info-prodotti/schede-di-sicurezza?download=423:scheda-di-sicurezza-zeolite-pomice
Products for
Garden
Animals
Carnivorous plants
Cactus
Bonsai
Aquariums
Scheda tecnica
https://docs.geosism.com/info-prodotti/schede-tecniche?download=198:scheda-tecnica-zeolite-pomice&start=80
Products for
Orchids
Vegetable garden

Recently viewed